All posts by kratz2021

Cut Glass Collection

As part of the residency project, I have started a collection of cut glass items. These were sourced from different second hand shops and build on an existing collection of items used for an exhibition at The  Edge at the State Library of Queensland in 2013.

I am particularly attracted to the patterns of the glass. A recurring central motif in many items is a star.

Cut Glass DishClear cut glass dish – approx 12cm diameter with central star motif and radiating pattern.

This links to my current interest in deep time including the birth of the universe and emergence of complexity. The glass items also look wonderful when lit from rear.  As such, I am considering mounting them over a light source. However, this remains to be seen…

In order to grow cells in the dishes, they need to be sterilised so that they do not carry any bacteria or other organisms that could contaminate my cells.

I am feeling more confident in using the benchtop autoclaves independently so am preparing a batch for sterilisation today. As per previous work, they are placed in autoclave bags and sealed with tape. Once the bags are autoclaved, black lines indicate successful sterilisation.

Cut Glass DishCut glass dish and wrapped dish ready for sterilisation.

I have also sources some small glass vials which I am considering integrating into some of the future creative works. There are various shapes that I am planning to test.

Glass VialsSelection of glass vials for cell culture trial including metal closures. 

Collection of Glass Items in Autoclave Bags Glass vessels in autoclave bags ready for sterilisation. 

Finally, I have also prepared some additional 150mm and 90mm Petri dishes. The large dishes will be used as container vessels for the cut glass dishes to keep them sterile during cell culture.

Petri dishes and other glassware ready for autoclavingPetri dishes and other glass items in autoclave bags ready for sterilisation. 

I divided the batch into two runs. As per previous process, I used cycle 6 (134 degrees for 10 min). This enables me to process both glassware and metal.  It takes about 10 min for the sterilization process (but extra for cooling to handle materials).

Autoclave InstructionsAutoclave instructions with cycle details. 

Autoclaved dishesAutoclaved bags containing sterilised Petri dishes. 

Autoclaved items stored in labAutoclaved bags stored in lab area, ready for use.

Project Delays

Unfortunately, we have hit another snag in relation to project progress. While we have ethics clearance to proceed with the cell immortalisation process, the ABM cell immortalisation kits we suggested are currently not available in Australia. Jo-Maree found a supplier in Singapore that has the item and associated reagents in stock but the shipping costs are prohibitively expensive at  $2235. This is because the items must be shipped on dry ice which requires additional processing and handling. There are also likely to be delays due to COVID.

The shipping expense is not the only issue as UTAS would need to organise the paperwork for import. As such Jo-Maree has suggested that we investigate alternative options with Australian suppliers. We are leaving this for the New Year.

Furniture Purchase for New Work

As mentioned previously, I have an upcoming show at The Barracks in New Norfolk in June 2022. This exhibition is the follow up to Mourning Story shown in 2021 and will showcase work arising from the Synapse Residency – although at this stage, I will not be showing any live cells.

I tend to be quite emergent in my approach to practice. However, many ideas tend to build on previous actions or make reference to previous works and concepts.  I have a history of repurposing furniture items to create new narratives that link to the domestic or particular historical periods. For the show in June, I am keen to revisit the idea of the Wunderkammer (cabinet of curiosities), but shift it from a sense of containment to a more open form that inspires a sense of wonder at ‘uncontainability’ of life.

One of my key strategies in finding the perfect item, is to trawl through Gumtree and second hand shops. It takes some time and diligence, but I have found the perfect piece.

CabinetTimber hall stand with mirror

Not only is a beautiful piece of furniture, it is also ideally suited to re-working as a triptych-style work as the central mirror panel can easily be removed.

At almost 2m high, I am very fortunate to have a friend and collaborator with a horse float to get it home!

Lockdown lingers…

Lockdown has lifted, but we have restrictions in place which limits access to lab areas unless absolutely necessary. Jo-Maree has kindly taken over caring duties and will pop in to feed my struggling fibroid cell colonies.

The HBVPs will be put to rest for now with scaffold tests fixed in 4% PFA. We may yet be able to stain them to determine if HBVPs were growing within the structure. Since the scaffolds are optimised for tissue/bone regeneration (and hence bone and tissue cells), they don’t seem to work too well with pericytes – so far anyway.

Since Jo-Maree had a stash of left over vials, we had planned to use Calcein to determine cell viability and visualise the cell growth along the scaffold structure as the scaffolds themselves seem to be non-fluorescent.

Calcein image via APB BiosciencesImpressive image of Calcein dye – live cells fluoresce a vibrant green – image via ABP Biosciences.

Since the Calcein dye works on live cells, we will need to reseed the scaffolds when lab-life returns to ‘normal’. This is fine as we will hopefully have enough fibroid cells by then to use for the scaffolds and also undertake fluorescent microscopy – i.e. use antibodies to reveal cell cytoskeleton details (e.g. actin filaments) and DAPI  blue-fluorescent dye for nuclei.

Fluorescently labelled cell via LeicaImage of fluorescent cells via Leica. 

Lockdown…

It has finally happened. We had our first major lockdown in response to the Delta COVID strain. I am hopeful that the estimated closure of non-essential venues (including UTAS) will stand at 3 days. Luckily I was ahead of the game and had already passaged and fed my cells in preparation for Friday teaching.  As such, they should be fine until I return on Tuesday.

May the force be with us!

Hematoxylin and Eosin Staining

Jo-Maree finally had some time to go over basic H&E staining procedures. Since my HBVPs are fixed on the base of  glass Petri Dishes, the process is much less involved than working with wax embedded specimens.

H&E is a very common stain combination used in histology. Hematoxylin stains nuclei blue-purple
Eosin stains cytoplasm (protein, muscle fibres etc.) pink
H & E Stain Protocol Basic H&E staining protocol from Jo-Maree.   We only need to follow the staining process.

Stain: washing Petri Dish on bench in Histology Lab at MSP with Erlenmeyer flask containing distilled water for washing. 

Prior to adding the Hematoxylin stain, we washed the Petri dishes with distilled water (DW). Usually, we would simply wash the dishes under running water from the tap. However, since rapid water could dislodge the cells from the base of the dish, we have used a beaker to control the water flow.  I washed each dish twice to remove PBS and dislodged cells.

Hematoxylin StainHematoxylin Stain – deep red stain 

Contrary to what the name Hematoxylin suggests, the dye is actually naturally derived and comes from the tree  Haematoxylum campechianum (Logwood). As such, it is non-toxic and does not need to be added in a fume cabinet. The dye was added to the Petri Dishes for 5 mins, then washed with distilled water.

The next step involved adding ammoniated water (approx 2 – 3 drops ammonia to 400mL distilled water) to the stained cells for 30 secs.   This process is referred to as ‘bluing’ and helps change the red – purple hematoxylin to a blue – purple color.

Hematoxylin Stained DishCells visible on the base of Petri Dish following Hematoxylin staining.

After washing the Petri Dish thoroughly after ‘bluing’, we added the Eosin stain.  Eosin is a xanthene dye and has an intense fluorescent colour.

Eosin StainEosin stain in Petri Dish.

The Eosin stain only needs 2 mins to stain the cytoplasm and matrix of cells. Following  another thorough wash of the dish, we added 95% ethanol and secured the Petri dish lids with parafilm.

For stained sections on glass slides, it is usual to add Xylene (toxic) and a coverslip. In this case, we could either create large scale glass covers (a bit impractical) or clear resin. I think clear resin is the best solution as it would create a barrier and preserve the dyed cells. I am keen to use the fixed cells in dishes as part of sculptural works.  However, I will need to check with lab manager David Steele that I am able to remove these fixed cells from the lab.

The struggle is real…

My fibroid cells are still struggling to gain a  foothold. I have yet to reach 80 – 90% confluency. We assumed that they are fibroblasts, but the difficulty of growing them in DMEM suggests that they may need different media.

Despite a slow growth rate, on 7/10/21, I passaged my flask of T25 and T75 (approx 70% confluent) at 1:2 to try and increase our stock of cells.

After four days (11/10/21), the cells in the T25 flasks have not grown much and there seemed to be quite a bit of cell debris (i.e. dead cells).  I’ve included a few images to provide a better idea of the growth.

T25 Flask 1 - 11/10/21T25 – Flask 1 P 3, 11/10/21

T25 Flask 1 - 11/10/21T25 – Flask 1 P 3, 11/10/21

T25 Flask 2 - 11/10/21T25 – Flask 2 P 3, 11/10/21

T25 Flask 2 - 11/10/21T25 – Flask 2 P 3, 11/10/21

The lag in growth could be a result of these cells growing from the remaining freeze mix. While the DMSO content was very low following plating , exposure to the toxin could have impacted on cell growth and proliferation over time.

In contrast, the T75 flasks seem and doing better. However, growth rate remains slow.

T75 Flask 1 - 11/10/21T75 – Flask 1 P 3, 11/10/21

T75 Flask 1 - 11/10/21T75 – Flask 1 P 3, 11/10/21

T75 Flask 2 - 11/10/21T75 – Flask 2 P 3, 11/10/21

T75 Flask 2 - 11/10/21T75 – Flask 2 P 3, 11/10/21

While we wait for different media to arrive, I added more FBS (20% total) to see if the increase in serum helps stimulate cell growth.

Some common reasons for poor cell growth include:

  1. Starting culture of cells too low in number.  This is a possibility, because we thawed and added the fibroid cells directly into a T75. At QUT, we always started primary cells in a T25 to ensure there were enough to stimulate growth. 
  2. Incorrect media. This is also a possibility, but it is difficult to determine the best media when we do not know which cell type we are currently working with. We have ordered some DMEM-F12. While this is still optimised for fibroblasts, it may help…plus we need some for the immortalisation and iPSC protocols anyway. 
  3. Mycoplasma contamination. The third option is bad. Mycoplasma contamination would require all cells to be destroyed. Regardless, we will need to check if this is an issue. 

We could also try bringing up another vial of cells. However, we only have 2 original vials left, so I am a bit cautious using another flask without further trouble shooting.

Plan B

Fortunately, we considered the potential for the fibroid cells to be unviable and have ethical clearance to get new cells via small biopsy. We will continue to try and optimise fibroid cell growth, but it looks like establishing another batch of cells will be more realistic to move the project forwards.

I will follow up with Brad and his colleagues to get the biopsy underway when lockdown (and end of semester marking) is finalised.

Sponges as scaffolds?

We are lucky in Tasmania to be able to travel freely across the state. With winter coming to an end, I saw an opportunity to visit Burnie with some art school colleagues. We witnessed the arrival of some of the first penguins at the Burnie Little Penguin colony for their annual mating and childrearing.

We also glanced some amazing sponges on the beaches in nearby Wynyard.

Wynyard BeachFossil Bluff – Wynyard.

Doctor's RocksDoctor’s Rocks – Wynyard

Marine Sponge texture

Seeing the texture and architecture of different marine sponges on the beach, prompted me to consider whether they have been considered as a scaffold architecture for cell growth.

Sponges from WikimediaDifferent sponges from Wikimedia Commons.

Turns out that yes, there is already a study on whether marine sponges could be used as scaffolds in bone repair.

In vitro Evaluation of Natural Marine Sponge Collagen as a Scaffold for Bone Tissue Engineering

While this has already been done. I think it would still be a nice side experiment to see whether I can grow my cells in a marine sponge scaffold. There are a number of companies that offer cleaned and bleached natural marine sponges for bathing, facial exfoliation and art – although the variety seems usually limited to honeycomb and silk sponges from the Mediterranean.

Sponges

Bag of sponges available from art supply store.

Perhaps the sponges could be used in conjunction with a hydrogel to assist with cell adhesion and proliferation. I think it would be quite lovely to make a self-portrait of ‘me’ as a sponge. Although, I will likely need to use a bioreactor to enable nutrients to reach the interior of the structure.

Final Sign Off

We are minor amendments away from final IBC approval to move ahead with iPSC and Cell Immortalisation processes.

I previously compiled a list of possible options based on available kits and associated literature. Brad and Jo-Maree recommended companies with Australian distributors due to delays in International shipping due to COVID. With this in mind, we identified the ThermoFisher
Epi5 Episomal iPSC Reprogramming Kit for reprogramming the fibroid (Tumour Baby) cells into a stem cell like state. The online product listing also has a comprehensive manual which provides clear instruction regarding the required materials and reagents and protocol. Epi5 Protocol

Overview of key steps in the reprogramming process from Epi5 manual.

We can now move forward with ordering the kit and other required/associated elements.

For cell immortalisation Brad also recommended we use a company with an Australian outlet.  Fischer Scientific may be the best option as they have a range of Alstem Immortalization  Products. We have identified the SV40 T Antigen and hTERT Cell Immortalization Kits as the most applicable for our cells.

Both kits have good product documentation and manuals available via the Alstem Bio website.

My preference is to ue the SV40 T Antigen. The protocol looks deceptively simple:

  1. Plate the target cells in one well of 6-well plate at density of 1-2 x 105 cells/well.
  2. The next day, take one vial of the concentrated recombinant lentivirus from -80 °C freezer and thaw it on ice.
  3. Infect the target cells in a 6-well plate with 4-20 μl/well viral supernatant in the presence of 4 μl TransPlus reagent (ALSTEM, cat#V050). Note: TransPlus reagent is a polycation that neutralizes charge interactions to increase binding between the pseudoviral capsid and the cellular membrane.
  4.  The next day, aspirate medium containing viral supernatant and add the appropriate complete growth medium to the cells and incubate at 37 °C.
  5. After 72 hours incubation, subculture the cells into 2 x 100 mm dishes and add the appropriate amount of puromycin for stable cell-line generation.
  6. 10-15 days after selection, pick clones for expansion and screen for positive ones. Note: Since the virus-titer will decrease significantly, we recommend that adding 25% v/v virus protection medium (ALSTEM, cat# VF050) into the thawed supernatant before frozen again for future use.

See: https://www.alstembio.com/web/protocol/SV40_T_Antigen_Cell_Immortalization_Kit_Protocol.pdf 

I hope it works out as simply as this sounds…